Call

 

On this page down the page you can get more superb insight concerning What Would Cause My Electric Water Heater to Stop Working?.

Many contemporary homes use an electrical water heater for their heating system, due to its convenience and simplicity of use. Nonetheless, just like any other electrical home appliances, issues might arise with its use, suddenly. It can be really discouraging to awaken to a chilly shower rather than a warm one or having your bathroom with water that isn't warm adequate or even as well hot. Whatever the case might be, water heater problems can be rather nerve-racking. Luckily, we've made a checklist of possible solutions to your hot water heater problems. There are a variety of aspects that might trigger much of these problems, maybe a problem with the power supply, the electric heating element, or the thermostat. Before doing anything, ensure you shut off the major power supply for safety and security. Whatever the trouble is, getting it dealt with need to not posture way too much of a problem if you comply with these steps:

 

Call A Professional:

If after changing all malfunctioning parts and resetting your temperature, the hot water heater still isn't working, you may require to contact a specialist plumber for an expert point of view. The issue with your heating system could be that the hot and cold faucets have been changed or it might be undersized for the amount of warm water required in your home. Whatever the instance may be, an expert plumber would certainly help fix the problem.

 

Inspect Your Power Supply:

As basic as this may appear, it is very needed. Without appropriate power, your water heater will certainly not operate. So the first thing to do when your water unexpectedly retires is to confirm that it isn't a power issue. Examine if the fuse is blown out or the breaker tripped. If the circuit breaker is the problem, merely turn it on and off again. Change any kind of broken or worn-out fuse. Evaluate the device with power after these adjustments to see if it's currently functioning.

 

Check Your Thermostat:

If your hot water heater still isn't functioning or the water appearing isn't hot sufficient, you may require to examine the temperature level settings on your top thermostat. Guarantee the circuit breaker is turned off prior to doing anything. Open the access panel as well as press the red button for temperature level reset above the thermostat. This ought to help heat the water. Turn the breaker back on and examine if the problem has been dealt with.

 

Examine the Heating Element in the Water Heater:

If it's not a power trouble, then try looking into your heating element if it is still working. Check each of your burner to be sure the issue isn't with any of them. If any one of them is malfunctioning, change that component and afterwards examine whether the hot water is back on.

 

Conclusion

Water heater problems are not always major. A lot of them are because of minor issues like a blown fuse or damaged burner. Changing the defective parts need to do the trick. Nonetheless, if you are still not able to resolve the trouble, give a call to your nearby plumber to find to get it taken care of.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

I was shown that write-up on Hot Water Heater Repair through someone on a different web blog. Sharing is nice. One never knows, you may be helping someone out. I value reading our article about No Hot Water — Water Heater Repair.

Free Estimates